Ndmp Support; Tape Drive And Media Specifications; Lto Tape Drive Specifications - Spectra TFinity User Manual

Appendix C — Specifications

NDMP Support

Spectra Logic tape libraries are compatible with local, remote, and three‐
way NDMP (Network Data Management Protocol) topologies, where the
tape library is connected to the NDMP data mover host over Fibre
Channel.
T D
APE RIVE AND
This section provides the basic specifications for the tape drives and media
supported by the library.

LTO Tape Drive Specifications

This section provides specifications for the LTO drives supported by the
library. See Tape Media Specifications on page 549 for information about
the media used in the library.
November 2020
M S
EDIA PECIFICATIONS
 The specifications in this section are provided for
Notes:
convenience only. Refer to the tape drive documentation for
the most current specifications (see LTO Ultrium Tape Drives
on page 20 and TS11xx Technology Drives on page 20).
 The specifications in this section are subject to change
without notice.

For T10K Drive specifications, see Using StorageTek T10K
Drives in a Spectra TFinity Library.
Note: LTO drives and media are also referred to as Ultrium or LTO
Ultrium drives and media.
User Guide—Spectra TFinity Library
NDMP Support
543