Spectra TFinity User Manual page 395

Chapter 12 — Library Troubleshooting
10. Once the library begins its power‐on sequence, remove the USB device
If you do not remove the USB device, the library power-on sequence will fail.
Important
If the library fails to boot, power off the library as described in
on page
the library as described in
Restore Other Configuration Changes
The library does not immediately generate a configuration backup file
when you make changes to any of the library configuration settings other
than those for partitions. If you made any changes to the library
configuration after the automatically generated configuration backup file
you used to restore the library was generated, you will need to repeat those
changes after completing the restore.
 If you have a manual backup of the library configuration that is more
 If you do not have a manual backup available, you will need to restore
Update the Library Inventory
When you restore the configuration, any magazines that were imported
into a partition after the configuration backup file you used was generated
are not recognized as belonging to the partition. Instead, the library
notifies you that there are unused magazines in the free pool.
Use the following instructions to update the library inventory to reflect the
correct number of magazines assigned to the partition.
1. Log in as a user with superuser or administrator privileges.
2. From the toolbar menu, select Configuration > Partitions. The Shared
3. Click Edit for the partition to which the unassigned magazines should
November 2020
if necessary.
156. Once the library is powered off, remove the USB device and power on
Power On the Library on page
current than the automatically generated configuration backup file you
used, you can use it to restore the updated configuration (see Restore
the Library Configuration Using a Saved Configuration on page 397).
the following changes manually:
 If you made configuration changes after the creation date of the
automatically generated configuration backup file you used, you
will need to use the options in the System Setup screen to repeat
those changes after the restore is complete.
 If you entered activation keys after the creation date of the
automatically generated configuration backup file you used, you
will need to use the Option Enablement pane of the System
Configuration screen to re‐enter those keys (see Enter Activation
Keys on page 110).
Library Services screen displays.
belong.
Restore From an Auto Configuration Save File
Power Off the Library
155.
User Guide—Spectra TFinity Library
395