Spectra TFinity User Manual page 205

Chapter 6 — Configuring and Managing Partitions
 If the storage partition uses LTO‐6 and later generation drives or
To use KMIP encryption key management the library must use BlueScale12.7.04 or
Important
later. The drives must have the following firmware:







November 2020
TS11xx drives and you configured a KMIP server, you can enable KMIP
encryption key management for the partition.
LTO-6 drives must use firmware version G352 or later
LTO-7 drives must use firmware version G5S2 or later
LTO-8 drives can use any firmware supported by the library
TS1140 technology drives must use firmware version 3B0E or later
TS1150 technology drives must use firmware version 4718 or later
TS1155 technology drives must use firmware version 47A2 or later
TS1160 technology drives must use firmware version 544F or later
 See the Spectra Tape Libraries Encryption User Guide for
Notes:
detailed instructions about configuring and using encryption
in the library.
 Any options that are not supported for the partition you are
currently configuring are grayed out.
 You can only use one type of encryption in a partition.
 You can only configure KMIP encryption or Spectra SKLM
encryption, not both.
 KMIP encryption and Spectra SKLM encryption are not
compatible with PostScan. Do not enable PostScan for the
partition if you want to use KMIP encryption or Spectra
SKLM encryption.
 Spectra SKLM key management, KMIP encryption, and
BlueScale encryption are not compatible with each other.
Data encrypted using one type of encryption key
management cannot be decrypted using another.
 BlueScale Encryption is not supported for partitions with
TS11xx technology drives.
Select the Encryption Mode
User Guide—Spectra TFinity Library
205