Request A Manual Postscan - Spectra TFinity User Manual

Chapter 9 — Configuring and Using Media Lifecycle Management

Request a Manual PostScan

The automatic PostScan triggers only add MLM‐enabled data cartridges to
the PostScan queue. However, cartridges can also be added to the PostScan
queue manually. This is especially useful if your library contains cartridges
that are not MLM‐enabled. You can also use the manual PostScan process
to verify a suspect MLM‐enabled cartridge even if it was previously
scanned.
Cartridges that are manually added to the PostScan queue are processed
before cartridges that were added as a result of the trigger criteria for the
partition. They are processed using the PostScan option that was specified
for the partition.
Use the following steps to manually start the PostScan process.
1. Enable Media Lifecycle Management if it is not already enabled (see
2. From the toolbar menu, select Maintenance > MLM. The Media
November 2020
Enabling MLM and Configuring Global Settings on page 295).
Lifecycle Management Tools screen displays.
Figure 185 Click Manual PostScan on the MLM Tools screen.
Request a Manual PostScan
User Guide—Spectra TFinity Library
313