Spectra TFinity User Manual page 157

Chapter 5 — Operating the Library
Use the Front Panel Power Button
To power off the library, press and hold the front panel power button for
approximately 5 seconds (the button's LED starts flashing). The library
begins its power‐off sequence, which allows the BlueScale software and
components to shut down gracefully.
Use the Soft Power Feature
The Soft Power feature disables the physical power button on the library
front panel and enables the soft power button on the General Status screen.
Using the Soft Power feature gives users with superuser privileges
exclusive control over powering the library off; other types of users cannot
power off the library, either by using the physical power button on the
library front panel or the Soft Power button on the General Status screen.
Follow these steps to power off the library using the Soft Power feature.
1.
2. From the toolbar, access the General Status screen.
November 2020
 The Soft Power feature is only available from the library's
Notes:
front panel touch screen interface; it is not available through
the BlueScale web interface (RLC).
 When you click the Soft Power button, you must respond to a
confirmation message before the library is powered off.
 The Soft Power feature must be enabled on the System Setup
screen before you can use it (see Enable Soft Power on
page 115).
 The feature can only be enabled or disabled by a superuser.
Log into the library as a user with superuser privileges (see Log Into the
User Interface on page 94).
User Guide—Spectra TFinity Library
Power Off the Library
157