Automatic Media Discovery - Spectra TFinity User Manual

Library
Hide thumbs Also See for TFinity:
Table of Contents

Advertisement

Chapter 9 — Configuring and Using Media Lifecycle Management
Spectra Certified MLM‐enabled LTO media was first available from 
Spectra Logic on November 15, 2007. The following table summarizes the 
level of information reported through MLM for media purchased before 
and after MLM became available.

Automatic Media Discovery

Overview The Media Auto Discovery feature is a background process that 
loads MLM‐enabled cartridges into a TS11xx technology drive or an LTO‐4 
or later generation drive, records the MLM information to the cartridge 
MAM, adds the cartridge to the MLM database, and returns the cartridge 
to its original location. The process is performed by the library 
independently from the storage management software. Media Auto 
Discovery must be enabled on the library, as described in Enabling MLM 
and Configuring Global Settings on page 295, before it can be used.
When Media Auto Discovery is enabled, MLM provides two options for 
proactively discovering media in a partition:
 Media Auto Discovery  —   T he default process that collects information 
November 2020
Media Type
LTO-3
LTO-4
LTO-5
LTO-6
LTO-7
LTO-8
TS11xx Technology
Note:
If you do not want to use automatic media discovery, you can 
wait until the library loads and then unloads each cartridge from 
an MLM‐capable drive for the first time during normal 
operation. When the cartridge is unloaded from the drive, the 
library discovers it and records the MLM data to the cartridge 
MAM and enters the data into the MLM database.
from the cartridge MAM and adds it to the MLM database. The Media 
Auto Discovery process only operates on newly imported cartridges 
that are not already in the MLM database.
Media Auto Discovery loads and reads the MAM in the tape, but 
Note:
does not thread the tape. The drive only reports the maximum 
and remaining capacity for the tape after the tape is threaded. 
Therefore, these statistics report as ʺ0ʺ until a drive reads from, 
or writes to, the tape.
Spectra Certified Media
Limited Reporting
Full Reporting
Full Reporting
Full Reporting
Full Reporting
Full Reporting
Full Reporting
User Guide—Spectra TFinity Library
Automatic Media Discovery
Non-MLM-Enabled
Media
Limited Reporting
Limited Reporting
Limited Reporting
Limited Reporting
Limited Reporting
Limited Reporting
Limited Reporting
286

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TFinity and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

This manual is also suitable for:

Tfinity library

Table of Contents