Creating A Cleaning Partition; Define The Initial Cleaning Partition Settings - Spectra TFinity User Manual

Chapter 6 — Configuring and Managing Partitions
C C
REATING A
The following sections describe using the BlueScale partition wizard to
create a cleaning partition for your library.
If you know that you want to use Auto Drive Clean with a storage
partition, it is easier to configure the cleaning partition before you
configure the storage partition(s). If you choose to create the storage
partitions before you create the cleaning partition, Auto Drive Clean is not
enabled until you modify the storage partitions to assign a cleaning
partition to them.

Define the Initial Cleaning Partition Settings

1. Log in as a user with superuser or administrator privileges.
2. From the toolbar menu, select Configuration > Partitions to display the
November 2020
P
LEANING ARTITION
Note: If you want to configure the storage partitions first, skip to
Creating a Storage Partition on page 189.
Shared Library Services screen.
 If one or more partitions are already created, the existing partitions
are listed in alphabetical order. Click New to display the Name and
Media Type screen.
If the New button is not displayed then all chambers in the
Note:
library are allocated. You need to delete a partition or edit
an existing partition to free up chambers, or make
hardware upgrades that increase the storage capacity of
the library before you can create another partition.
Figure 111 Click New on the Shared Library Services screen to
begin creating the cleaning partition.
Define the Initial Cleaning Partition Settings
User Guide—Spectra TFinity Library
187