Spectra TFinity User Manual page 250

Chapter 7 — Importing and Exporting Cartridges
2. The next steps depend on which TAP you selected.
Select...
Continue
Stop Exporting
November 2020
If you selected the Center TAP
a. When you click Export/Exchange, the TeraPorter retrieves a
magazine from the selected location and places it in the TAP. The
TAP door opens and a Feedback Required screen displays.
b. Remove the magazine from the TAP and either:
 Place another magazine of the same type in the TAP.
—OR—
 Remove or exchange one or more cartridges in the magazine and
then place the magazine back in the TAP.
Note: If you are exchanging cartridges, make sure to only
exchange cartridges of the same type.
c. Return to the operator panel and select the appropriate option on
the Feedback Required screen.
Note: If you wait more than 10 minutes to respond, the library times
out and displays a message on the operator panel. The TAP door
is left open.
If...
You want to make additional exchanges. The process continues as follows:
1. The TAP door closes automatically. The TeraPorter returns the magazine to
its original location. It then retrieves the next magazine and delivers it to the
second TAP. The TAP doors alternate as you continue the exchange process.
2. The exchange process continues as long as there are magazines in the
selected location or until you click Stop Exporting on the Feedback Required
screen. Continue to make exchanges, clicking Continue after each one. When
all of the magazines in the selected location have been presented for
exchange, the process stops automatically and the Import/Export TeraPack
Magazines screen displays.
The magazine or cartridge you exchanged is the last one you want to process.
Exchange Magazines or Cartridges in a Partition
User Guide—Spectra TFinity Library
250