Spectra TFinity User Manual page 131

Chapter 4 — Configuring the Library
3. Click Edit next to SNMP Settings. The SNMP Settings screen displays.
4. Enter the following information on the SNMP Settings screen.
Field
System Contact
System Location
Valid Query
Communities
November 2020
Figure 63 The SNMP Settings screen.
Description
Maps to the value for system.4 (sysContact) object in the MIB. Enter the
informations and click Save.
Maps to the value for system.6 (sysLocation) object in the MIB. Enter the
informations and click Save.
Lists all SNMP communities to which the library currently belongs. The library
only responds to SNMP queries from members of these communities. The
default valid query community is public.
 Click Edit next to the setting you need to modify. The current settings display
in the corresponding Add/Update section of the screen. Click Save in the
corresponding Add/Update section of the screen after you make your
changes.
Important: Community strings are case sensitive. If the library is configured to
include the community called "OurCommunity, " it answers to queries from
OurCommunity but not from a community called "ourcommunity. "
 Click Delete to remove a setting.
Enable and Configure SNMP
User Guide—Spectra TFinity Library
131