Confirming And Saving The Partition Settings - Spectra TFinity User Manual

Chapter 6 — Configuring and Managing Partitions
C
ONFIRMING AND
After you finish configuring a partition, confirm and save the partition
settings to complete the creation process.
1. After you complete the configuration screens for the partition as
2. Select whether you want to save the current library configuration.
November 2020
If you have multiple exporters, repeat the configuration steps in this
section for the port(s) on the additional exporters.
If you only selected one port in the Robotic Path Visibility screen or if
you have already configured both ports, proceed to Confirming and
Saving the Partition Settings.
S
AVING THE
Note: If you want to save the configuration to a USB device, connect
the device to the USB port on the LCM (see Connect a USB
Device to the Library on page 178) or the operator panel and
allow time for the device to mount before continuing.
described in the previous sections, click Next. The Save Library
Configuration screen displays.
Figure 131 The Save Library Configuration screen.
 Don't Save Library Configuration — A backup of the changed library
configuration is not saved.
 Save Library Configuration To (highly recommended) — Saves a
backup of the library configuration to the selected destination.
Using this option is highly recommended to ensure that you can
easily restore the previous library configuration, if necessary.
Select whether to save the library configuration file to a USB device
or to email it to an already‐configured mail recipient (see Configure
Mail Users on page 120).
Do not use the default autosupport@spectralogic.com email
Note:
recipient. Spectra Logic does not save emailed configuration files
unless they are specifically requested for troubleshooting.
Configure the Port Addressing for the Controllers
P S
ARTITION ETTINGS
User Guide—Spectra TFinity Library
211