Spectra TFinity User Manual page 346

Chapter 11 — Configuring and Using AutoSupport
5. Click Next. The Save Profile screen displays. Verify that all of the
6. When all of the information is correct, click Save.
7. The AutoSupport Profiles screen redisplays, listing the newly
8. Repeat Step 1 through Step 6 if you want to create additional profiles.
9. Click Previous to return to the main AutoSupport screen.
November 2020
information shown is correct.
If any information needs to be changed, click Previous to display the
screen in which the changes need to be made.
Figure 213 Review the profile information.
completed profile.
Figure 214 All of the AutoSupport profiles are listed on
the AutoSupport Profiles screen.
Note: When you create multiple profiles, they are listed in the order in
which they are created, not in alphanumeric order.
If one of the profiles is configured as an AutoSend recipient, the
Configure Alarms button is active (see Figure 208 on page 343).
Configure AutoSupport Profiles
User Guide—Spectra TFinity Library
346