Modifying An Existing Partition - Spectra TFinity User Manual

Chapter 6 — Configuring and Managing Partitions
M
ODIFYING AN
Overview This section describes how to edit or modify an existing
partition.
Use your storage management software to empty all drives and discontinue host
Caution
operations before modifying an existing partition. If the library has SlotIQ enabled, run
the Advanced Utilities Unload All Drives followed by Resolve SlotIQ Virtualized Drive
to Slot Moves.
You might want to modify an existing partition for any of the following
reasons:
 Assign a Cleaning Partition — If you created a cleaning partition and
 Assign a Global Spare Drive — If you want to designate one of the
 Make Resources Available to Create a New Cleaning or Storage
 Rename Partition — If you want to rename the partition, you need to
 Disable PreScan or Change the PostScan Settings — If you want to
 Enable or Disable Encryption — I f you need to modify encryption
 Adding Additional Exporting Controllers — I f a partition is configured
November 2020
E P
XISTING ARTITION
Note: You cannot change the media type (and thus the drive type)
specified for the partition.
now want to assign it to the storage partition, you need to modify the
Chambers and Drives screen for the storage partition to add the
cleaning partition.
unassigned drives as a Global Spare, you need to modify the Spare
Drives screen to assign the drive to the partition.
Partition — I f the existing partitions use all of the licensed chambers in
the library, and you want to create a new partition, you need to reduce
the number of chambers assigned to an existing partition to provide the
chambers needed for the new partition. If you want to create a storage
partition, you may also need to install additional drives or unassign
drives that were previously assigned to other partitions.
modify it in the Name and Media Type screen.
change the settings that you chose (to take advantage of a new Global
Spare drive, for example), you need to select a different setting in the
MLM Media Verification screen.
settings for the partition, you need to log in as an encryption user and
make the necessary changes.
with one exporting controller, and you want to add additional
controllers to export the library, you need to edit the partition and select
the additional controllers.
Enable Time-based Access Order System (TAOS)
User Guide—Spectra TFinity Library
220