Spectra TFinity User Manual page 148

Chapter 4 — Configuring the Library
2. Start a web browser session on the computer you want to use to
3. Enter the camera's current IP address in the browser's Address field.
Figure 76 The white BlueScale Vision camera
viewer start page.
4. Using Figure 76 and Figure 77, determine the type of BlueScale vision
November 2020
configure the camera.
Note: The software included with the black camera requires ActiveX to
view the streaming video and controls. You must use Internet
Explorer or see Streaming video and camera controls do not
work for the library camera on page 365 for alternate solutions.
The start page for the BlueScale Vision viewer opens.
 If this is the first time you are connecting to the camera, your
Notes:
browser may indicate that an add‐on is required.
 If you do not know the current IP address for the camera and
the default IP address does not work, see Discovering and
Setting the BlueScale Vision Camera IP Address on page 381.
camera you have, and use the appropriate section to configure the
camera.

If you have the white BlueScale vision camera, use Edit the Camera
IP Address ‐ White on page 149.

If you have the black BlueScale vision camera, use Edit the Camera
IP Address ‐ Black on page 152.
Use Manual Backup of the Library Configuration
Figure 77 The black BlueScale Vision camera
viewer start page.
User Guide—Spectra TFinity Library
148