Spectra TFinity User Manual page 242

Chapter 7 — Importing and Exporting Cartridges
November 2020
d. Close the bulk TAP door firmly by pressing at the top and bottom.
An audible click indicates that the door is latched closed. The
carousel rotates the magazines to the interior of the library and the
TeraPorter begins moving the magazines to open chambers in the
selected destination. The Import/Export TeraPack Magazines screen
refreshes to show that the moves are in progress.
 If you fail to close the door within 10 minutes, the import
Notes:
operation times out.
 Click Stop Importing to terminate the import operation. If
there are still magazines in the bulk TAP, you will be
instructed to remove them before the next import or export
operation.
 If you selected LeftAndRight TAP, the library starts processing
moves as soon as you close one bulk TAP door. The library
completes processing moves from the first bulk TAP before
starting to process moves for the second bulk TAP.
Figure 152 The Import/Export TeraPack Magazines screen
shows that the import process is underway.
e. When a TeraPorter finishes moving all of the magazines out of a
bulk TAP, the carousel rotates to face the outside of the library and
the door release button LED turns solid green again, indicating that
it is ready to for you to load additional magazines. The process
described in this section continues until one of the following occurs:
 You insert fewer than 14 magazines in a bulk TAP — When the
library detects that the bulk TAP door was closed with fewer
than 14 magazines inserted, the magazines are imported, if
applicable the other bulk TAP is checked and magazines
imported, and the operation ends.
 There are no more empty chambers in the destination — The
operation ends when the destination is full. If the selected
destination did not contain enough empty chambers to
accommodate all of the magazines that you loaded into the
carousel, the extra magazines are left in the bulk TAP. If desired,
see Using the Advanced Import/Export Options on page 255 to
export magazines from the desired location to provide chambers
for the magazines that could not be imported.
 You click Stop Importing — When you click Stop Importing the
import operation terminates. If there are still magazines in the
bulk TAP, you will be instructed to remove them before the next
import or export operation.
Import the Magazines
User Guide—Spectra TFinity Library
242