Spectra TFinity User Manual page 374

Chapter 12 — Library Troubleshooting
Procedure Use the following steps to capture the desired trace.
1. Log into the library as a user with superuser or administrator
2. From the toolbar menu, select Maintenance > Tools to display the
3. If you want to save the traces to a USB device, connect the USB device
4. Select Traces. The System Traces screen displays with the trace options
5. Select the type of trace that Spectra Logic Technical Support requested.
November 2020
privileges.
Maintenance Tools screen.
Figure 230 The Maintenance Tools screen.
to a port on the LCM and allow time for it to mount; otherwise, skip to
the next step.
that were selected the last time the screen was viewed.
Figure 231 Select the traces you want to capture on the
System Traces screen (Error Log trace results shown).
 LCM Trace — C aptures a trace relating to a single aspect of
operations related to the LCM.
 Component Trace — C aptures a trace relating to the logical library or
a single aspect of operations related to the robotics or a RIM.
Note: The RIMs in the library are listed as F‐QIPs.
View Hardware Health Monitoring (HHM) Data
User Guide—Spectra TFinity Library
374