Add Options - Spectra TFinity User Manual

Chapter 4 — Configuring the Library
3. Enter the activation key for the option you want to enable in the Key
4. Click Save. The System Setup screen refreshes and displays the new

Add Options

This section describes how to determine the Hardware ID and obtain
activation keys for new options after the initial installation. See Renewing
the BlueScale Software Support Key on page 437 if you need to renew or
extend your service contract, which includes the BlueScale Software
Support key.
The BlueScale Software Support key and all option activation keys are tied to the
Important
library serial number. If you have multiple libraries, you need separate activation
keys for each library.
Determine the Library Serial Number
The library serial number (Hardware ID) is required for renewing or
extending your service contract, which includes the BlueScale Software
Support key, and for purchasing additional Capacity on Demand (CoD) or
other upgrade options.
Use the following steps to determine your library's serial number.
1.
2. Make a note of the library's serial number (Hardware ID), which is
November 2020
field.
Note: The activation keys are not case‐sensitive.
activation key and its description in the list of keys. The option is
available for immediate use.
Keep a record of all activation keys listed on the Option
Note:
Enablement pane of the System Setup screen. You need to re‐
enter them if the library is reset to factory defaults.
Access the System Setup screen (see Accessing the System Setup Screen
on page 106).
needed to generate the activation keys.
Figure 53 Locate the library's serial number (Hardware ID).
The library's hardware ID
User Guide—Spectra TFinity Library
Add Options
111