Spectra TFinity User Manual page 386

Chapter 12 — Library Troubleshooting
9. Click the forward arrow to display the New Settings confirmation
Figure 243 Confirm that the new settings for the camera are correct.
10. Click the forward arrow to save the updated settings. A confirmation
11. After saving the new camera configuration verify the settings by
12. If the library has multiple cameras, repeat the steps in this section for
13.
November 2020
screen. Confirm that all of the settings are correct.
dialog box displays. Click OK to confirm that you want to save the new
settings.
Figure 244 Save the updated settings for the camera.
attempting to access the camera at the new IP address (see Using a Web
browser on page 174).
each camera. Make a record of the IP address for each camera and the
frame in which each camera is located.
Other camera settings can be configured if desired. See the BlueScale
Vision Camera User Guide for information about other available settings.
Configure the BlueScale Vision Camera - White
User Guide—Spectra TFinity Library
Click arrow
to continue
386