Spectra TFinity User Manual page 314

Chapter 9 — Configuring and Using Media Lifecycle Management
3. Click Manual PostScan. The MLM Manual PostScan screen displays
4. If the media is in a different partition than the one currently displayed,
5. Select the cartridge that you want to check for media errors. You can
To select a cartridge using
the...
Source list
Slot number
Barcode label information
November 2020
showing the information for the partition that was selected the last time
the screen was viewed.
Figure 186 Use the MLM PostScan screen to select the
cartridges to add to the PostScan queue.
select the desired partition from the Partition drop‐down list, and then
click Go. The Source list refreshes to display a list of the cartridges in the
requested partition. The list shows the name of the location (for
example, the slot number) and the barcode label information for the
cartridge in that location.
select the cartridge either from the Source list, by entering its barcode,
or by entering the slot number where it is located.
Follow these steps...
Scroll through the list of available media and select the desired
cartridge.
1. Enter the slot number for the cartridge you want in the View
Source Slot field.
2. Click Go. The Source list refreshes to show the requested cartridge
highlighted at the top of the list.
3. Click the cartridge to select it.
1. Enter the barcode label information for the cartridge you want to
locate in the Find by Barcode field.
2. Click Find. The Source list refreshes to show the requested
cartridge highlighted at the top of the list.
3. Click the cartridge to select it.
Important:
are searched. Scroll to the top of the source list before clicking
Find. The search starts at the second visible slot.
Only the slots below the top one displayed in the list
User Guide—Spectra TFinity Library
Request a Manual PostScan
314