Spectra TFinity User Manual page 128

Chapter 4 — Configuring the Library
3. Save the security certificate file (ssl.crt) and the private key
4. Connect the USB device to a port on the LCM (see Figure 15 on page 50)
5. Log into the library as a user with superuser or administrative
6. From the toolbar menu, select Maintenance > Tools. The Maintenance
7. Select Utilities. The Utilities screen displays.
8. Click Show Advanced. The Advanced Utilities Confirmation screen
9. Click Next. The Utilities screen refreshes to show a list of the advanced
10. Scroll through the list of advanced utilities and select the Load SSL
11. Click Run Utility to copy the security certificate and private key to the
November 2020
(ssl.key) in the root folder of a USB device.
Note: The security certificate file must be named ssl.crt and the
private key must be named ssl.key.
or the front panel and wait for the device to mount.
privileges (see Log Into the User Interface on page 94).
Tools screen displays.
displays.
utilities.
Certificate and Key from USB utility.
Figure 61 Use the
to load the security certificate onto the library.
TFinity library web server.
 The SSL keys are not stored as part of the library
Notes:
configuration. If you replace the SD card, you will have to
reload these keys.
 To change or update the SSL keys, you must first manually
delete the old keys from the LCM. Contact Spectra Logic
Technical Support for assistance (see Contacting Spectra
Logic on page 7).
Install a Security Certificate and Authentication Key
Load SSL Certificate and Key from USB
User Guide—Spectra TFinity Library
utility
128