Spectra TFinity User Manual page 477

Chapter 15 — Maintaining the Drives
4. On the next page, select the version of ITDT that you want to
5. Click Continue. If you have not logged into the website yet, it will
6. Choose one of the following methods to download the selected ITDT
7. Refer to the ITDT documentation for information about using ITDT.
Download the Drive Firmware
1. After installing ITDT, launch the program so that it creates the Input
2. Log into your account on the Spectra Logic Technical Support portal at 
3. Select Downloads > Tape Drive Firmware.
4. On the Tape Drive Firmware page (see Figure 303 on page 475), locate
5. Click the firmware version name in the column labeled Current
6. Use your web browser to save the file to the ITDT Input folder on the
November 2020
download. If desired, you can select multiple versions.
If you are unsure which version to select, click Show Fix Details
Note:
to see additional information.
prompt you to do so now.
installation files:
 Download using your browser (HTTP)
 Download using bulk FTP
 Download using Download Director
Contact Spectra Logic Technical Support if you need assistance (see
Contacting Spectra Logic on page 7).
and Output folders required during the firmware update process.
https://support.spectralogic.com.
the appropriate drive firmware with respect to drive type (LTO or
TS11xx), generation (for example, LTO‐5), interface type (for example,
SAS or Fibre Channel), and form factor (full‐height or half‐height).
Firmware Version.
Note: The link in the column labeled Package File (For Staging) is for
using Package Update to update the drive firmware (see Update
Using Drive Update through Package Update on page 479) do
not select this file if you are updating drive firmware using
ITDT.
computer where ITDT is installed.
User Guide—Spectra TFinity Library
Update Using ITDT
477