Updating , Servicing , Or Oving The Library - Spectra TFinity User Manual

Chapter 14 — Maintaining the Library
U , S
PDATING ERVICING
Contact Spectra Logic Technical Support before making any changes to
your library hardware or performing any service operations.
Installing Additional Drives
Installing an additional drive into a partially filled DBA causes the library
to reassign element addresses. To avoid errors, reconfigure your storage
management software after adding a new drive (refer to your software
documentation for instructions).
Servicing the Library
In the event that it is necessary to replace a component, make sure that you
have instructions for performing the procedure and you either:
 Are instructed to do so by Spectra Logic Technical Support,
 Have a support contract such as Assisted Self‐Maintenance (ASM).
Moving the Library
The library hardware is configured to ensure proper thermal control, air
flow, and dust filtering. After the library is installed, do not move the
library. Do not remove the doors from the back of the library or any library
components (except the TeraPack magazines).
Moving the library without assistance from a Spectra Certified Field Engineer voids
Important
your service contract. Contact Spectra Logic Technical Support for assistance if you
need to relocate your library (see
November 2020
, M
OR
—OR—
L
OVING THE IBRARY
Contacting Spectra Logic on page
User Guide—Spectra TFinity Library
7).
436