Installing Cord Locks - Spectra TFinity User Manual

Chapter 14 — Maintaining the Library
8. Position the filter cover over the fan assembly and push firmly inward
9. If necessary, repeat Step 1 through Step 8 for each additional main
I C
NSTALLING
Install the cord locks included with each frame to prevent the power cords
from being inadvertently disconnected from the dual AC input connectors.
1.
2. Discontinue all file storage operations to the library.
3. Power off the library (see Power Off the Library on page 156).
4. Set the AC breaker switches on the dual AC module to the "off"
5. If the power cords are plugged into wall plugs, unplug them. Also
November 2020
on the sides of the cover to snap it onto the ball studs extending from
each side of the frame. As soon as the cover is in position, the fans
restart.
frame, drive frame, or service frame in the library.
L
ORD OCKS
Note: The photos in this section show installing the cord locks on a
dual AC power module. The parts and the procedure are the
same for the dual AC with convenience outlet or the dual AC2
power modules.
Pause PostScan if it is running (see Pause the PostScan Process on
page 315). Any tapes currently being scanned are returned to their
storage locations.
position.
unplug them from the dual AC module where you plan to install the
cord locks.
Manage Update Packages
User Guide—Spectra TFinity Library
461