Reset A Rim - Spectra TFinity User Manual

Chapter 12 — Library Troubleshooting

Reset a RIM

Hardware Reset
To perform a hardware reset of a RIM, insert the tip of a toothpick or other
similar non‐conductive object into the hole in the back panel to press the
Reset button.
Do not use a metallic object to press the reset button. You may inadvertently cause
Caution
an electrical short inside the module.
BlueScale Software Reset
You can also reset the RIM through the BlueScale user interface.
1. Determine the BlueScale identifier for the RIM you need to reset.
2. Log into the library as a user with superuser or administrator
3. From the toolbar menu, select Maintenance > Tools. The Maintenance
4. Select Utilities. The Utilities screen displays.
November 2020
Figure 235 Location of the reset
button on a RIM2.
Note: RIMs are shown as F‐QIPs in the BlueScale user interface and are
identified according to their physical location in the library. See
RIM Identifiers on page 69 for information about identifiers.
privileges.
Tools screen displays.
Reset
Reset
Figure 236 Location of the reset
button on a RIM.
User Guide—Spectra TFinity Library
Reset a RIM
379