Upload A Move Queue - Spectra TFinity User Manual

Chapter 7 — Importing and Exporting Cartridges

Upload a Move Queue

1. Create a media exchange move file listing the offsets for the imports or
2. Log into the library as a superuser or administrator.
3. If you saved the move queue file to a USB device, connect the device to
4. Access the Upload Media Exchange Move List screen.
November 2020
exports you want to initiate. You can create the file using the
mediaExchange.xml?action=prepareImportExportList
command (see the Spectra Tape Libraries XML Command Reference for
more information) or manually. If you are creating the move file
manually, keep the following in mind:
 The file must be a Windows format ASCII text file (End of line is
carriage return and line feed).
 Each line in the file must contain a 1‐based TeraPack offset.
 All chambers indicated by the offsets in a file must be full indicating
an export, or all chambers must be empty indicating an import. You
cannot mix import and export moves in one file.
 If you are using a USB device to upload the file, the file must be
named MediaExchangeMoves.txt and the file must be saved to
the root of the USB device.
one of the USB ports on the LCM or operator panel and allow time for
the device to mount before proceeding.
Using RLC, from the toolbar menu, select General > Import/Export.
The Upload Media Exchange Move List screen displays.
— OR—
Access the Upload Media Exchange Move List screen from the front
panel.
a. On the toolbar menu, select General > Import/Export. The 
Import/Export TeraPack Magazines screen displays showing the
information for the last partition that was viewed on either the
Import/Export TeraPack Magazines screen or the Inventory screen.
b. Click Advanced. The Advanced Import/Export screen displays
showing the information for the partition that was selected on the
basic Import/Export TeraPack Magazines screen.
Upload a Move Queue
User Guide—Spectra TFinity Library
259