Spectra TFinity User Manual page 432

Chapter 13 — Drive Troubleshooting
3. From the toolbar menu, select Configuration > DLM to display the
4. Click Test next to the drive you want to test to start the DLM Drive
November 2020
Drives screen.
Note: The Test button is not present if DLM is not enabled.
Figure 264 Click Test on the Drives screen to launch the
wizard.
Health Verification wizard.
The wizard determines whether all of the requirements for the test have
been met.
All Requirements Met. If all of the requirements for performing the test
have been met, the Drive Health Verification screen displays a warning
about the upcoming test process. Proceed to Step 5.
Figure 265 Click Next on the Drive Health Verification screen
to begin the verification process.
Run the DLM Drive Health Verification Wizard
User Guide—Spectra TFinity Library
432