Spectra TFinity User Manual page 188

Chapter 6 — Configuring and Managing Partitions
Do not select the Automatically create a partition option. Doing so configures a
Important
storage partition using the majority of the licensed chambers. You then need to
modify the storage partition to make chambers available for a cleaning partition.
3. Enter a name for the partition and select LTO Clean or TS11x0 Clean as
For this field...
Name
Media Type
November 2020
 If the library does not currently have any partitions configured,
select Manually create a partition, then click New to display the
Name and Media Type screen.
Figure 112 Select Manually create a partition.
the media type.
Figure 113 Enter a name for the partition and select LTO
Clean or TS11x0 Clean to create a cleaning partition.
Do the following...
Enter a unique, descriptive name to identify the partition as a cleaning
partition. Names can be any length and can include @ ‐ _ /. and the space
character. Partition names over 32 characters causes a scroll bar to display on
some screens and are not recommended.
The default name for a cleaning partition is "Cleaning n", where n is a
Note:
number. The partition names are listed alphabetically on many of the BlueScale
screens. If you want the cleaning partitions to be listed after the storage
partitions, precede the name with a "z" or "_".
Select LTO Clean or TS11x0 Clean to create a cleaning partition.
Define the Initial Cleaning Partition Settings
User Guide—Spectra TFinity Library
188