Ontrolling The Library Power; Power On The Library - Spectra TFinity User Manual

Chapter 5 — Operating the Library
C
ONTROLLING THE
The library power is controlled using the front panel power button or the
BlueScale Soft Power feature.

Power On the Library

Before powering on the library, make sure that all of the library's power
cables are plugged into AC outlets and that the AC breaker switches
corresponding to each cable, on the back of the main frame and each drive
expansion frame, are set to the on (up) position.
For redundant AC power configurations, connect the primary and secondary input
Important
for each frame to a separate branch circuit, which allows for failover in the event of
a power failure in one of the circuits (see
additional requirements).
Use the Front Panel Power Button
1. Press and hold the front panel power button until the button's LED
November 2020
L
IBRARY
Figure 85 Connect the AC inputs and set the breaker switches to
the on position.
illuminates and the LCD operator panel turns on.
Figure 86 Press and hold the front panel power button.
P
OWER
Power Specifications on page 533
Primary and secondary
AC breaker switches
Power button
User Guide—Spectra TFinity Library
Power On the Library
for
Primary and secondary
AC inputs
155