Configure Advanced Settings; Enter Storage Partition Name And Media Type - Spectra TFinity User Manual

Chapter 6 — Configuring and Managing Partitions

Configure Advanced Settings

If necessary, click Advanced to configure advanced partition settings. See
Configure Advanced Partition Settings on page 214 for a description of the
advanced options and instructions for configuring them.
Advanced partition settings should only be used when recommended by Spectra
Caution
Logic Technical Support.
Otherwise, continue with Enter Storage Partition Name and Media Type.

Enter Storage Partition Name and Media Type

Enter a name for the storage partition and select the media type.
For this field...
Name
Media Type
November 2020
Note: If the storage partition media type is grayed out, then all licensed
chambers are assigned to partitions. Edit an existing partition to
free up chambers or purchase a Capacity on Demand key to
increase the number of available storage chambers.
Figure 117 Enter a name for the partition and select the
media type.
Do the following...
Enter a unique, descriptive name to identify the partition. Names can be any
length and can include @ ‐ _ /. and the space character. Partition names over 32
characters causes a scroll bar to display on some screens and are not
recommended.
The default name for a storage partition is "Partition n", where n is a number.
Note: In many of the BlueScale screens, the partitions are listed alphabetically.
Keep this in mind when naming your partitions.
Select LTO to create a storage partition that uses LTO drives and media or TS11x0
to create a storage partition that uses TS11xx technology drives and media.
Configure Advanced Settings
User Guide—Spectra TFinity Library
192