Spectra TFinity User Manual page 442

Chapter 14 — Maintaining the Library
6. If you want to save the output from the utility, use the check boxes at
Selecting this
location...
Mail results to:
Save results to
Compact Flash file
Save to USB
7. Click Run Utility. The Utility Results screen displays, showing a list of
8. If requested to do so, send this information to Spectra Logic Technical
November 2020
the top of the screen to select the location; otherwise skip to Step 7.
Saves the output...
As an attachment to an email sent to the specified mail recipient. Use the drop‐
down list to select the recipient for the report file.
To send the email with the output to someone who is not already listed as a
library user, you must first configure that person as an email recipient (see
Configure Mail Users on page 120).
Note: Do not use the default autosupport@ s pectralogic.com email recipient
unless Spectra Logic Technical Support specifically instructs you to do so.
Spectra Logic does not save emailed results files unless they are specifically
requested for troubleshooting.
To the memory card in the LCM.
Note: Select this option only if specifically instructed to do so by Spectra Logic
Technical Support.
To a USB device connected to a USB port on the LCM or the operator panel.
Note: This option is only available if you inserted a USB device in Step 3 on
page 441.
the firmware levels for all installed components.
Figure 277 The results screen for the Display Firmware
Versions utility.
Support (see Contacting Spectra Logic on page 7) for advanced
troubleshooting.
Check Component Firmware Versions (Optional)
User Guide—Spectra TFinity Library
442