Spectra TFinity User Manual page 115

Chapter 4 — Configuring the Library
Setting
Enable SSL
Enable SNMP
Agent
SNMP Settings
Enable Soft Power
November 2020
Description
Enable or disable Secure Socket Layer (SSL) access to the
BlueScale web interface.
Important: Enabling SSL configures the BlueScale web
interface to use a secure Internet connection. You must
prefix the IP address with https:// instead of just entering
the IP address when accessing the BlueScale web
interface.
Note: Beginning with BlueScale 12.8.00, the library uses
TLS 1.2.
1. Select the Enable SSL check box to enable the option (or
clear the check box to disable it).
2. Click Save.
3. Click OK in response to the notification about resetting
the web server.
4. Wait for the web server to reset (approximately 2 to
3 minutes), and then log back into the library.
5. If desired, Install a Security Certificate and
Authentication Key as described on page page 126.
Enable or disable the SNMP agent and configure SNMP
settings.
1. Select the Enable SNMP check box to enable the option (or
clear the check box to disable it).
2. Click Save.
3. If you enabled SNMP, click SNMP Settings to configure
the SNMP options. See Enable and Configure SNMP on
page 130 for detailed information and instructions.
4. Click Save to save the SNMP settings and return to the
System Setup screen.
Notes:
 The option to edit the SNMP Settings is only present
after you select Enable SNMP Agent and click Save.
 Spectra Logic libraries implement SNMP Version 2.
Enable or disable the Soft Power feature. See Use the Soft
Power Feature on page 157 for information about the Soft
Power feature and instructions for using it.
1. Select the Enable Soft Power check box to enable the
option (or clear the check box to disable it).
2. Click Save.
Note: The Soft Power feature can only be enabled or
disabled by a superuser.
Configure the System Settings
User Guide—Spectra TFinity Library
Default
Cleared
(Disabled)
Cleared
(Disabled)
Cleared
(Disabled)
115