Spectra TFinity User Manual page 145

Chapter 4 — Configuring the Library
5. Use the Select the destination drop‐down list to select where you want
Select...
save library
configuration to
USB
mail library
configuration to
[mail recipient]
6. Click Run Utility.
7.
Verify the Configuration Backup
After creating a backup of your library configuration, use one of the
methods described in the following sections to verify that the backup was
successful as soon as possible after you create it.
When Saved to a USB Device
1. Plug the USB device into a USB port on an available computer.
2. Examine the list of files on the USB device and locate the
3. Open the \SavedConfigs folder and verify that a folder with a name
4. Open the time‐stamped folder and confirm that it contains several
5. If the configuration files are present and are more than 0 bytes in size,
November 2020
to save the file.
Note: Do not use the check boxes at the top of the screen. They act on
the Utility Results message, not the configuration file.
To...
Save the library configuration file to the USB device connected to a USB port on
the LCM or operator panel. The backup file is stored in a folder called
SavedConfigs\<date-time>, where
when the backup was created. The folder contains multiple configuration files
with the format cnnnnnn.cfg, where n is a number between 0 and 9.
Send the library configuration file as a zip file attached to an email addressed to
a previously configured mail recipient (see Configure Mail Users on page 120).
Do not mail the file to autosupport@spectralogic.com unless Spectra Logic
Note:
Technical Support specifically requested the file for troubleshooting.
After a brief delay, the Utility Results screen displays, showing that the
configuration file was either saved or sent.
Confirm that the backup was successful, as described in Verify the
Configuration Backup.
\SavedConfigs folder.
corresponding to the date and time you created the backup is present.
configuration files named using the format cnnnnnn.cfg, where
number between 0 and 9. Make sure the files are more than 0 bytes in
size.
the backup was successful. Store the USB device in a safe location.
Note: You can zip the files in the folder and email the zip file to others
or make additional copies of the folder for safekeeping.
Use Manual Backup of the Library Configuration
<date-time> is the time stamp for
User Guide—Spectra TFinity Library
is a
n
145