Spectra TFinity User Manual page 123

Chapter 4 — Configuring the Library
Auto Configuration Save Process The library generates an Auto
Configuration Save backup file once a week and every time you create or
modify a partition. This backup file contains the current library
configuration, the MLM and DLM databases, and any BlueScale
encryption keys stored in the library.
Auto Configuration Save Email Process Configuring the library to
automatically send the Auto Configuration Save backup file as an email
attachment to a previously configured email recipient is highly
recommended. The library sends the email whenever it generates the Auto
Configuration Save backup file. The email includes instructions for using
the attached file to restore the library.
To use this automatic email option, you must first configure the user to whom you
Important
want the backup file sent as a mail recipient (see
page
Configure Automatic Email Option Use the following steps to configure
the automatic email option for the Auto Configuration Save backup file.
1.
2. Click Edit next to Auto Configuration Save in the Other Settings pane.
3. Select the Email Configuration check box, and then use the drop‐down
November 2020
 The time for generating the weekly Auto Configuration Save
Notes:
backup file is based on the first time the file was generated.
 The library does not generate an Auto Configuration Save
backup file when you make configuration changes other than
creating or modifying a partition.
120).
Access the System Setup screen (see Accessing the System Setup Screen
on page 106).
The Automatic Configuration Save Setup screen displays.
Figure 58 The Automatic Configuration Save Setup screen.
list to select the desired recipient from the list of previously configured
mail recipients.
Note: Do not use the default autosupport@spectralogic.com email
recipient. Spectra Logic does not save emailed configuration
files.
Enable Email for the Auto Configuration Save File
Configure Mail Users on
User Guide—Spectra TFinity Library
123