ABB IRB 660 Product Manual page 52

2 Installation and commissioning
2.3.1 Lifting robot with fork lift
Continued
Lifting robot with fork lift
This section details how to secure the fork lift set to the robot in order to lift and
move the robot using the fork lift ONLY!
1
2
3
Continues on next page
52
Action
If a cooling fan for the axis 1 motor is used, it
must be removed in order to use the fork lift
device!
Position the robot as shown in the figure to the
right!
Fit the two adapters to the robot and secure.
Strap up axis 2 motor cable on the adapter.
© Copyright 2006-2020 ABB. All rights reserved.
Note
Release the brakes if required as de-
tailed in section Manually releasing the
brakes on page 60.
xx0500002275
Attachment points are shown in figure
Attachment points on robot on page
Attachment screws, 2 pcs, M16 x 90.
Tightening torque: 270 Nm.
xx0500002278
• A: Strap, velcro
Product manual - IRB 660
3HAC025755-001 Revision: W
50.