ABB IRB 660 Product Manual page 283

3
4
5
6
Product manual - IRB 660
3HAC025755-001 Revision: W
Action
Make sure the small o-ring around the oil hole
is fitted properly!
Attach the lifting accessory, base and gear 1
and the lifting tool (chain) to the gearbox.
Fit two guide pins in two of the attachment
holes in the gearbox, parallel to each other.
CAUTION
The gearbox weighs .
All lifting accessories used must be sized ac-
cordingly!
© Copyright 2006-2020 ABB. All rights reserved.
4.7.1 Replacing the axis 1 gearbox
Note
xx1000001392
Specified in Required equipment on
page 276.
xx1000001395
Specified in Required equipment on
page 276.
Continues on next page
4 Repair
Continued
283