Repair; Introduction - ABB IRB 660 Product Manual

4 Repair

4.1 Introduction

Structure of this chapter
This chapter describes repair activities for the IRB 660. Each procedure contains
the information required to perform the activity, for example spare parts numbers,
required special tools, and materials.
Report replaced units
Safety information
Make sure to read through the chapter
service work.
Product manual - IRB 660
3HAC025755-001 Revision: W
WARNING
Repair activities not described in this chapter must only be carried out by ABB.
Note
When replacing a part on the IRB 660, report to your local ABB the serial number,
the article number, and the revision of both the replaced unit and the replacement
unit.
This is particularly important for safety equipment to maintain the safety integrity
of the installation.
Note
If the IRB 660 is connected to power, always make sure that the IRB 660 is
connected to protective earth and a residual current device (RCD) before starting
any repair work.
For more information see:
• Product manual - IRC5
• Product manual - IRC5 Panel Mounted Controller
© Copyright 2006-2020 ABB. All rights reserved.
Safety on page 19 before commencing any
4 Repair
4.1 Introduction
141