ABB IRB 660 Product Manual page 297

13
14
15
16
17
18
Product manual - IRB 660
3HAC025755-001 Revision: W
Action
Clean the gearbox of residual grease.
Apply locking liquid in the attachment holes
for the gearbox cover.
Fit the o-ring in the cover.
Refit the cover with its attachment screws
and washers.
Note
Fit the cover so that the arrow on the cover
points upwards!
Refit the motors axes 2-3.
Perform a leakdown test.
© Copyright 2006-2020 ABB. All rights reserved.
4.7.2 Replacing the gearbox, axes 2- 3
Note
Loctite 243.
xx1000001407
M8x35 quality 8.8-A2F (12 pcs)
Tightening torque: 24 Nm
xx1000001408
See Replacing motors, axes 2 and 3 on
page 258
See Performing a leak-down test on
page 142.
Continues on next page
4 Repair
Continued
297