Changing Oil, Gearbox Axis 6 - ABB IRB 660 Product Manual

3 Maintenance

3.4.4 Changing oil, gearbox axis 6

3.4.4 Changing oil, gearbox axis 6
Location of oil plugs
Gearbox axis 6 is located in the center of the tilt house unit.
A
C
xx0500002484
A
B
C
Required equipment
Equipment, etc.
Lubrication oil
Oil exchange equipment
Oil collecting vessel
Standard toolkit
Draining, oil
Use this procedure to drain oil from gearbox axis 6.
When using oil change equipment, follow the instructions enclosed with kit.
1
Continues on next page
130
Gearbox, axis 6
Oil plug, filling
Oil plug, draining
Art. no.
3HAC032140-001
3HAC021745-001
Action
Put tilt house in a suitable position.
© Copyright 2006-2020 ABB. All rights reserved.
B
Amount Note
250 ml Kyodo Yushi TMO 150
Do not mix with other oil types!
Vessel capacity: 400 ml.
- Content is defined in section
Standard tools on page
Note
Product manual - IRB 660
3HAC025755-001 Revision: W
347.