Control Port Numbering - Endpoint Devices; Factory Default Settings; Ubex-Pro20-Hdmi-F100 / R100 Series; Ubex-Pro20-Hdmi-F110 - Lightware UBEX-PRO20-HDMI-F110 User Manual

 
     
12. Appendix 12. Appendix
12.3.7. Control Port Numbering - Endpoint Devices

UBEX-PRO20-HDMI-F100 / R100 series

The port numbering is valid for all operation modes (TX / RX / TRX).
Description
Gigabit Ethernet 1
Ethernet
Gigabit Ethernet 2

UBEX-PRO20-HDMI-F110

The port numbering is valid for all operation modes (TX / RX / TRX).
Description
Gigabit Ethernet 1
Ethernet Gigabit Ethernet 2
Gigabit Ethernet 3
Serial RS-232
12.4. Factory Default Settings
12.4.1. UBEX-PRO20-HDMI-F100 / R100 series
Parameter
General settings
Display backlight 10
Jog dial rotary direction CW down
Video input port settings
(TX - HDMI in 1 and 2 / TRX - HDMI in 2)
HDCP Enabled
Stream enable Enabled
Emulated EDID on the inputs Dynamic
Video output port settings
(RX - HDMI out 1 and 2 / TRX - HDMI out 1)
HDCP mode Auto
Power 5V mode Always on
Timing mode
No sync screen mode
No sync screen color
Port number
P1
HDCP mode
P2 Power 5V mode
No sync screen mode
No sync screen color
(TX - HDMI in 1 / RX - HDMI out 1 / TRX - HDMI out 1)
Port number
Scaler enable
Scale to
P1
Image position
P2
(TX - HDMI in 2 / RX - HDMI out 2 / TRX - HDMI in 2)
P3
FRC enable
P1 Resolution to force
Color space conversion (CSC)
Setting/Value
Static IP address - TX mode
Static IP address - RX mode
Static IP address - TRX mode
DHCP (dynamic IP address)
Subnet mask
Static gateway
LW3 port number
HTTP port number
Application mode
Unique port names
Unique device label
User EDIDs
Applied F-series endpoint firmware package: v1.4.1 | Applied R-series endpoint firmware package: v1.4.1 | LDC software: v1.34.0b2
UBEX series – Extender Application Mode – User's Manual UBEX series – Extender Application Mode – User's Manual
Parameter Setting/Value
Free run
Auto
R: 128, G: 128, B: 128 (grey)
Local video output port settings
(TX - HDMI out 1 and 2 / TRX - HDMI out 2)
Auto
Always on
Auto
R: 128, G: 128, B: 128 (grey)
Scaler settings
Disabled (Pass-through mode)
1920x1080p60
Fit
Frame rate converter settings
Disabled (Pass-through mode)
1920x1080p60
Color space converter settings
(All HDMI ports of TX / RX / TRX)
No conversion
Network settings
192.168.0.101
192.168.0.102
192.168.0.101
Disabled
255.255.255.0
192.168.0.1
6107
80
Miscellaneous
Auto
Cleared
Cleared
Not cleared
12.4.2. UBEX-PRO20-HDMI-F110
Parameter
General settings
Display backlight 10
Jog dial rotary direction CW down
Video input port settings
(TX - HDMI in 1 and 2 / TRX - HDMI in 2)
HDCP Enabled
Stream enable Enabled
Emulated EDID on the inputs Dynamic
Video output port settings
(RX - HDMI out 1 and 2 / TRX - HDMI out 1)
HDCP mode Auto
Power 5V mode Always on
Timing mode Free run
No sync screen mode Auto
No sync screen color R: 128, G: 128, B: 128 (grey)
Local video output port settings
(TX - HDMI out 1 and 2 / TRX - HDMI out 2)
HDCP mode Auto
Power 5V mode Always on
No sync screen mode Auto
No sync screen color R: 128, G: 128, B: 128 (grey)
Scaler settings
(TX - HDMI in 1 / RX - HDMI out 1 / TRX - HDMI out 1)
Scaler enable Disabled (Pass-through mode)
Scale to 1920x1080p60
Image position Fit
Frame rate converter settings
(TX - HDMI in 2 / RX - HDMI out 2 / TRX - HDMI in 2)
FRC enable Disabled (Pass-through mode)
Resolution to force 1920x1080p60
Color space converter settings
(All HDMI ports of TX / RX / TRX)
Color space conversion (CSC) No conversion
132 132
Setting/Value