Parity Setting; Stopbits Setting; Databits Setting; Command Injection Tcp Port Setting - Lightware UBEX-PRO20-HDMI-F110 User Manual

 
     
7. Programmers' Reference 7. Programmers' Reference
7.13.3. Parity Setting
Command and Response
SET•/MEDIA/UART/<port>.Parity=<number>
ç
pw•/MEDIA/UART/<port>.Parity=<number>
æ
Parameters
Parameter
Identifier Value
description
<number> Parity value
Example
ç SET /MEDIA/UART/P1.Parity=0
æ pw /MEDIA/UART/P1.Parity=0
7.13.4. Stopbits Setting
Command and Response
SET•/MEDIA/UART/<port>.StopBits=<number>
ç
pw•/MEDIA/UART/<port>.StopBits=<number>
æ
Parameters
Parameter
Identifier Value
description
<number> Stop bits value
Example
ç SET /MEDIA/UART/P1.StopBits=0
æ pw /MEDIA/UART/P1.StopBits=0
7.13.5. Databits Setting
Command and Response
SET•/MEDIA/UART/<port>.DataBits=<number>
ç
pw•/MEDIA/UART/<port>.DataBits=<number>
æ
Parameters
Explanation Identifier
0 None
<number>
1 Odd
2 Even
Example
ç SET /MEDIA/UART/P1.DataBits=8
æ pw /MEDIA/UART/P1.DataBits=8
7.13.6. Command Injection TCP Port Setting
Command and Response
SET•/MEDIA/UART/<port>.CommandInjectionPort=<port>
ç
pw•/MEDIA/UART/<port>.CommandInjectionPort=<port>
æ
Example
ç SET /MEDIA/UART/P1.CommandInjectionPort=8001
æ pw /MEDIA/UART/P1.CommandInjectionPort=8001
Explanation
0 1
1 1,5
2 2
Applied F-series endpoint firmware package: v1.4.1 | Applied R-series endpoint firmware package: v1.4.1 | LDC software: v1.34.0b2
UBEX series – Extender Application Mode – User's Manual UBEX series – Extender Application Mode – User's Manual
Parameter
Value Explanation
description
8 8 databits
Databits value
9 9 databits
7.14. Infrared Port Configuration

DIFFERENCE: Only the UBEX-PRO20-HDMI-F110 model has built
with Infrared interface port. #infra #ir
Parameters
Parameter Description
<in> IR input port, example: S1
<out> IR output port, example: D1
7.14.1. Enable/Disable the Port
Command and Response
SET•/MEDIA/IR/<in|out>.Enable=<logical_value>
ç
pw•/MEDIA/IR/<in|out>.Enable=<logical_value>
æ
Parameters
Parameter
Identifier Value
description
true
Port enable/
<logical_value>
disable setting
false
Example
ç SET /MEDIA/IR/S1.Enable=true
æ pw /MEDIA/IR/S1.Enable=true
7.14.2. Enable Command Injection
Command and Response
SET·/MEDIA/IR/<in|out>.CommandInjectionEnable=<logical_value>
ç
pw·/MEDIA/IR/<in|out>.CommandInjectionEnable=<logical_value>
æ
Parameters
Parameter
Identifier Value
description
Command true
<logical_value> injection enable/
false
disable setting
Example
ç SET /MEDIA/IR/D1.CommandInjectionEnable=true
æ pw /MEDIA/IR/D1.CommandInjectionEnable=true
101 101
Explanation
The port is enabled.
The port is disabled.
Explanation
CI is enabled.
CI is disabled.