Analog Audio Input Level Settings; Volume; Balance - Lightware UMX-TPS-TX120 User Manual


  
7. LW3 Programmers' Reference
7.8. Analog Audio Input Level Settings
7.8.1. Volume
Command and Response #analogaudio #volume
SET·/MEDIA/AUDIO/<in>.Volume=<level>
ç
pw·/MEDIA/AUDIO/<in>.Volume=<level>
æ
Parameters
<level> Sets the input volume (attenuation) between -95.625 dB and 0 dB in step of -0.375 dB. The
value is rounded up if necessary to match with the step value.
Example
ç SET /MEDIA/AUDIO/I1.Volume=-15
æ pw /MEDIA/AUDIO/I1.Volume=-15.000
7.8.2. Balance
Command and Response #analogaudio #balance
SET·/MEDIA/AUDIO/<in>.Balance=<level>
ç
pw·/MEDIA/AUDIO/<in>.Balance=<level>
æ
Parameters
<level> Sets the balance; 0 means left balance, 100 means right balance, step is 1. Center is 50
(default).
Example
ç SET /MEDIA/AUDIO/I5.Balance=75
æ pw /MEDIA/AUDIO/I5.Balance=75
Explanation
The balance level of the right audio sink is set to 75%, the left one is set to 25%.
Applied firmware packages: (UMX-TPS): v1.5.0b4 | (WP-UMX-TPS): v1.4.0b8 | (FP-UMX-TPS): v1.4.0b8 | LDC software: v2.5.6b2
UMX-TPS-TX100 series – User's Manual 115