7.LW3Programmers'Reference
7.7.5. Balance Setting
Command and Response
#balance
SET·/MEDIA/AUDIO/<out>.Balance=<level>
Î
pw·/MEDIA/AUDIO/<out>.Balance=<level>
Í
Parameters
<level>
Sets the balance; -100 means left balance, 100 means right balance, step is 1. Center is 0
(default).
Example
Î SET/MEDIA/AUDIO/O2.Balance=0
Í pw/MEDIA/AUDIO/O2.Balance=0
7.7.6. Balance Setting in Steps
Command and Response
CALL·/MEDIA/AUDIO/<out>.stepBalance(<level>)
Î
Í mO·/MEDIA/AUDIO/<out>.stepBalance
Parameters
<level>
Sets the balance; -100 means left balance, 100 means right balance, step is 1. Center is 0
(default).
Example
Î CALL/MEDIA/AUDIO/O2.stepBalance(1)
Í mO/MEDIA/AUDIO/O2.stepBalance
HDMI-TPS-RX110AY series – User's Manual
7.8. Network Configuration
7.8.1. Query the DHCP State
Command and Response
Î GET·/MANAGEMENT/NETWORK.DhcpEnabled
pw·/MANAGEMENT/NETWORK.DhcpEnabled=<logical_value>
Í
Parameters
Identifier
<logical_value>
Example
Î GET/MANAGEMENT/NETWORK.DhcpEnabled
Í pw/MANAGEMENT/NETWORK.DhcpEnabled=true
7.8.2. Change the DHCP State
Command and Response
SET·/MANAGEMENT/NETWORK.DhcpEnabled=<logical_value>
Î
pw·/MANAGEMENT/NETWORK.DhcpEnabled=<logical_value>
Í
Parameters
See the previous section.
Example
Î SET/MANAGEMENT/NETWORK.DhcpEnabled=false
Í pw/MANAGEMENT/NETWORK.DhcpEnabled=false
7.8.3. Query the IP Address
Command and Response
Î GET·/MANAGEMENT/NETWORK.IpAddress
Í pr·/MANAGEMENT/NETWORK.IpAddress=<IP_Address>
Example
Î GET/MANAGEMENT/NETWORK.IpAddress
Í pr/MANAGEMENT/NETWORK.IpAddress=192.168.0.100
Appliedfirmwarepackage:v1.4.0 | LDCsoftware:v2.4.0b3
#network #ipaddress #dhcp
Parameter description
Value
true
Dynamic IP address is set.
DHCP (dynamic IP
address) setting
false
Fix IP address is set.
78
Parameter value