Features; Model Comparison - Lightware HDMI-TPS-RX110AY Series User Manual


  
1. Introduction
1.4. Features
3D and 4K Support
Highbandwidthallowsextensionofresolutionsupto4Kandeven3Dsourcesanddisplaysare
supported.
Signal Transmission up to 170 m
Video and audio signal transmission (HDMI, Ethernet, RS-232, and Infra-Red over a single
CAT5e...CAT7e cable.
Pixel Accurate Reclocking
Each output has a clean, jitter free signal, eliminating signal instability and distortion caused by
longcablesorconnectorreflections.
Frame Detector and Signal Analysis
The exact video and audio signal format can be determined such as timing, frequencies, scan
mode, HDCP encryption, color range, color space and audio sample rate.
HDCP-compliant
The receiver fulfills the HDCP standard. HDCP capability on the digital video inputs can be
disabled when non-protected content is extended.
Built-in Event Manager
TheEventManagertooltakescareofallthenecessarycontrolinasmallerconfigurationby
performingpredefinedactionsinresponsetodevicestatuschanges.Hence,inalesscomplex
environment, there is no need to invest in additional control solutions, which makes the receiver
the best choice for numerous applications.
Remote Power
The receiver is PoE-compatible and can be powered locally by the supplied power adaptor, or
remotely via the TPS connection (through the CATx cable) with a compatible power source
equipment, e.g. MMX6x2-HT series matrix switchers and TPS2 matrix boards.
Bi-directional RS-232 Pass-through
RS-232
AVsystemscanalsocontainserialportcontrollersandcontrolleddevices.Serialportpass-
through supports any unit that works with standard RS-232.
Relay
2xcontrollablerelaymodulesupto30V,1Asupport.
RELAY
Ethernet Control
MultiplesimultaneousTCP/IPconnectionsareavailablewithasimpleASCII-basedprotocolfor
controlling,configuringthereceiverorperformafirmwareupgrade.
HDMI-TPS-RX110AY series – User's Manual
Advanced Control Features (Only for HDMI-TPS-RX110AY-Plus model)
CEC
RS-232
x
11 0100 1
1.5. Model Comparison
The available models have different features depending on their design. The following table contains the
mostimportantdifferencesbetweenthetwomodels:
HDMI-TPS-RX110AY
HDMI-TPS-RX110AY-Plus
TheAVinput/outputports,interfaceportsandthesoftwarefeatureswhicharenotmentionedherearethe
same in case of both models.
Appliedfirmwarepackage:v1.4.0 | LDCsoftware:v2.4.0b3
Dark Mode
Rentalapplicationrequiresthisfunction,whichkeepstheLEDsunlittohidethedeviceduring
the event.
Consumer Electronic Control
Supports transmitting standard CEC commands in order to remote control the source or sink
device.
Infra Message Sending
Infrared (IR) is a wireless technology used for device communication over short ranges. Third
party control systems may send IR control commands to endpoints turning them on and off or
switching their inputs.
RS-232 Recognizer
Support recognizing incoming RS-232 messages to integrate with 3rd party devices like VC
codec.
Advanced Control Features
Infra message sending CEC message sending
-
 
9
RS-232 recognizer
RS-232
CEC
x
11 0100 1
- -
   