Ubex-Pro20-Hdmi-R100 Series; Features - Lightware UBEX-PRO20-HDMI-F110 User Manual

 
     
1. Introduction 1. Introduction
1.2.2. UBEX-PRO20-HDMI-R100 Series
UBEX R-series Power cable with
endpoint device Neutrik powerCON
connector
Safety & warranty info,
Quick Start Guide
1.3. Features
For All UBEX Endpoint Models
Uncompressed 4K Support
Up to HDMI 2.0 4K 2160p@60Hz 4:4:4 video input or
4096x2160@60Hz resolution over a 20 Gigabit network
with extra low latency.
Ethernet Based Extender
The UBEX system is Ethernet based, using 10 GbE,
IGMPv2, and IPv4 protocols.
Pixel Accurate Reclocking
Each output has a clean, jitter free signal, eliminating
signal instability and distortion caused by long cables or
connector reflections.
Scaling the Output Image
Video scaling is the process of changing the size of a
video frame in order to match the native resolution of
a display sink. It involves converting the resolution to a
higher or lower format and also a change in aspect ratio;
typically from 4:3 to 16:9.
UBEX series – Extender Application Mode – User's Manual UBEX series – Extender Application Mode – User's Manual
HDCP 2.2 compliant
The UBEX extenders complies to the HDCP 2.2 standard.
2.2
HDCP capability on the digital video inputs can be
disabled when non-protected content is extended.
Frame Detector and Signal Analysis
UTP patch cable (3 m)
The exact video and audio signal format can be
determined such as timing, frequencies, scan mode,
HDCP encryption, color range, color space and audio
sample rate.
Changeable Operation Mode
UBEX endpoint devices can be configured as transmitter,
receiver, or transceiver in few simple step by the user
anytime.
Frame Rate Converter
Frame rate conversion is available for the UBEX endpoints
in transmitter, receiver, and transceiver operation modes
either. The most frequently used refresh rates can be
forced on both inputs or outputs.
Seamless Switching (Clean Cut)
UBEX series extenders provide seamless switching
(clean cut) technology which is the capability to deliver
consistent performance and reliability. The advantage of
the technology is that various environments with different
video sources and displays will not impact signal loss.
Multi Stream
UBEX endpoint devices are able to simultaneously
transmit two video streams with embedded audio via the
SFP+ interface.
Color Space Conversion
YCbCr
Color space of the output video can be changed based
RGB
on the type of the display device.
Local Video Output
User can attach a local monitor to observe the video
signal sent through the SFP+ ports. The resolution and
clock frequency are the same with the HDMI inputs, no
internal scaling or conversion is applied.
Applied F-series endpoint firmware package: v1.4.1 | Applied R-series endpoint firmware package: v1.4.1 | LDC software: v1.34.0b2
Modular SFP+ Interface
UBEX series extenders use standard, certificated 10 Gbps
SFP+ optical modules which are plug and play, so they
are swappable by the user.
Silent Operation
The optimized fan operation allows installing the
endpoint device to places where minimum sound
emission requires.
Open API
Open-source API technology at the core makes these
Lightware products easy to integrate into third-party
systems. Every bit of data in Lightware systems is openly
available for higher level management and monitoring
systems.
Only for UBEX-PRO20-HDMI-F110 Model
Audio Embedder and De-embedder Function
The analog audio can be embedded to HDMI outputs
and embedded audio can be routed to the analog audio
output in transmitter, receiver, and transceiver operation
modes as well.
RS-232 Interface
RS-232
AV systems can also contain serial port for controlled
devices. Serial port supports any unit that works with
standard RS-232.
Infrared Interface
Infrared (IR) is a wireless technology used for device
communication over short ranges. Infrared is commonly
used for remote control based applications. Third-
party control systems may send IR control commands
to endpoints turning them on and off or switching their
inputs.
Only for the UBEX-PRO20-HDMI-R100 Series Models
Mounting Threads
Mounting threads on top and one of the sides for the
R-series models to conform strict installation safety
regulations.
10 10