Ubex-Pro20-Hdmi-R100 Series; Optional Accessories; Features - Lightware UBEX-PRO20-HDMI-F100 User Manual

 
     
1. Introduction 1. Introduction
1.2.2. UBEX-PRO20-HDMI-R100 Series
UBEX R-series Power cable with
endpoint device Neutrik powerCON
connector
1.3. Optional Accessories
The following items can be purchased optionally for the indicated device.
UBEX-PRO20-HDMI-F100 / F110
1U high rack shelf Mounting bracket V2

UBEX-PRO20-HDMI-R100 Series

Rack ears for
mounting (2x) with
M4x8 screws (4x)
series – Extender Application Mode – User's Manual series – Extender Application Mode – User's Manual
UTP patch cable (3 m) Safety & warranty info,
Quick Start Guide
Applied F-series endpoint firmware package: v2.0.0 | Applied R-series endpoint firmware package: v2.0.0 | LDC software: v2.5.9b3
1.4. Features
For All UBEX Endpoint Models
Uncompressed 4K Support
Up to HDMI 2.0 4K 2160p@60Hz 4:4:4 video input or 4096x2160@60Hz resolution over a
20 Gigabit network with extra low latency.
Ethernet Based Extender
The UBEX system is Ethernet based, using 10 GbE, IGMPv2, and IPv4 protocols.
Pixel Accurate Reclocking
Each output has a clean, jitter free signal, eliminating signal instability and distortion caused by
long cables or connector reflections.
Scaling the Output Image
Video scaling is the process of changing the size of a video frame in order to match the native
resolution of a display sink. It involves converting the resolution to a higher or lower format and
also a change in aspect ratio; typically from 4:3 to 16:9.
HDCP 2.2 compliant
The UBEX extenders complies to the HDCP 2.2 standard. HDCP capability on the digital video
2.2
inputs can be disabled when non-protected content is extended.
Frame Detector and Signal Analysis
The exact video and audio signal format can be determined such as timing, frequencies, scan
mode, HDCP encryption, color range, color space and audio sample rate.
Changeable Operation Mode
UBEX endpoint devices can be configured as transmitter, receiver, or transceiver in few simple
step by the user anytime.
Frame Rate Converter
Frame rate conversion is available for the UBEX endpoints in transmitter, receiver, and
transceiver operation modes either. The most frequently used refresh rates can be forced on
both inputs or outputs.
Seamless Switching (Clean Cut)
UBEX series extenders provide seamless switching (clean cut) technology which is the
capability to deliver consistent performance and reliability. The advantage of the technology is
that various environments with different video sources and displays will not impact signal loss.
11 11