Box Contents; Ubex-Pro20-Hdmi-F100 / F110; Ubex-Pro20-Hdmi-R100 Series; Ubex-Mmu-X200 - Lightware UBEX Series User Manual

 
     
1. Introduction 1. Introduction
1.2. Box Contents
1.2.1. UBEX-PRO20-HDMI-F100 / F110
UBEX F series IEC power cable
endpoint device
Safety & warranty info, Phoenix Combicon
Quick Start Guide 3-pole connector *
* For UBEX-PRO20-HDMI-F110 model.
INFO:
10GbE singlemode/multimode SFP+ modules can be ordered
separately for the UBEX devices. For the details please contact
sales@lightware.com.
1.2.2. UBEX-PRO20-HDMI-R100 Series
UBEX R-series Power cable with
endpoint device Neutrik powerCON
connector
Safety & warranty info,
Quick Start Guide
Applied F-series endpoint firmware package: v1.4.1 | Applied R-series endpoint firmware package: v1.4.1 | Applied MMU firmware package: v1.2.1 | LDC software: v1.34.0b2
1.2.3. UBEX-MMU-X200

UBEX-MMU-X200

device
UTP patch cable (3 m)
Phoenix Combicon
®
3-pole connector (2x)
Phoenix Combicon
5-pole connector *

INFO: 1GbE singlemode/multimode SFP module can be ordered
separately for the UBEX devices. For the details please contact
sales@lightware.com.
1.3. Features
For All UBEX Endpoint Models
Uncompressed 4K Support
Up to HDMI 2.0 4K 2160p@60Hz 4:4:4 video input or
4096x2160@60Hz resolution over a 20 Gigabit network
with extra low latency.
Ethernet Based Extender
UTP patch cable (3 m)
The UBEX system is Ethernet based, using 10 GbE,
IGMPv2, and IPv4 protocols.
Pixel Accurate Reclocking
Each output has a clean, jitter free signal, eliminating
signal instability and distortion caused by long cables or
connector reflections.
HDCP 2.2 compliant
The UBEX extenders complies to the HDCP 2.2 standard.
2.2
HDCP capability on the digital video inputs can be
disabled when non-protected content is extended.
UBEX series – Matrix Application Mode – User's Manual UBEX series – Matrix Application Mode – User's Manual
IEC power cable UTP patch cable (3 m)
(2x)
Safety & warranty info,
Quick Start Guide
Frame Detector and Signal Analysis
The exact video and audio signal format can be
determined such as timing, frequencies, scan mode,
HDCP encryption, color range, color space and audio
sample rate.
Changeable Operation Mode
UBEX endpoint devices can be configured as transmitter,
receiver, or transceiver in few simple step by the user
anytime.
Scaling the Output Image
Video scaling is the process of changing the size of a
video frame in order to match the native resolution of
a display sink. It involves converting the resolution to a
higher or lower format and also a change in aspect ratio;
typically from 4:3 to 16:9.
Frame Rate Converter
Frame rate conversion is available for the UBEX endpoints
in transmitter, receiver, and transceiver operation modes
either. The most frequently used refresh rates can be
forced on both inputs or outputs.
Seamless Switching (Clean Cut)
UBEX series extenders provide seamless switching
(clean cut) technology which is the capability to deliver
consistent performance and reliability. The advantage of
the technology is that various environments with different
video sources and displays will not impact signal loss.
Multi Stream
UBEX endpoint devices are able to simultaneously
transmit two video streams with embedded audio via the
SFP+ interface.
Color Space Conversion
YCbCr
Color space of the output video can be changed based
RGB
on the type of the display device.
11 11