System Commands; Querytheproductname; Setthedevicelabel; Querytheserialnumber - Lightware HDMI-TPS-RX110AY Series User Manual


  
7.LW3Programmers'Reference
7.4. System Commands
7.4.1. Query the Product Name
Thenameoftheproductisaread-onlyparameterandcannotbemodified.
Command and Response
Î GET·/.ProductName
pr·/.ProductName=<Product_name>
Í
Example
Î GET/.ProductName
Í pr/.ProductName=HDMI-TPS-RX110AY-Plus
7.4.2. Set the Device Label
ATTENTION!
The device label can be changed to a custom text in the StatustaboftheLDCsoftware.This
writable parameter is not the same as the ProductName parameter.
Command and Response #devicelabel #label
SET·/MANAGEMENT/UID/DeviceLabel=<Custom_name>
Î
pw·/MANAGEMENT/UID/DeviceLabel=<Custom_name>
Í
TheDeviceLabelcanbe39characterlengthandASCIIcharactersareallowed.Longernamesaretruncated.
Example
Î SET/MANAGEMENT/UID.DeviceLabel=RX110_Conference1
Í pw/MANAGEMENT/UID.DeviceLabel=RX110_Conference1
7.4.3. Query the Serial Number
Command and Response
Î GET·/.SerialNumber
pr·/.SerialNumber=<serial_nr>
Í
Example
Î GET/.SerialNumber
Í pr/.SerialNumber=87654321
HDMI-TPS-RX110AY series – User's Manual
7.4.4. Query the Firmware Version
Command and Response
Î GET·/SYS/MB.FirmwareVersion
pr·/SYS/MB.FirmwareVersion=<firmware_version>
Í
Example
Î GET/SYS/MB.FirmwareVersion
Í pr/SYS/MB.FirmwareVersion=1.4.0b14
7.4.5. Identify the Device
CallingthemethodresultstheblinkingofthestatusLEDsfor10seconds.Thefeaturehelpstoidentifythe
device itself in the rack shelf.
Command and Response
Î CALL·/MANAGEMENT/UI:identifyMe()
Í mO·/MANAGEMENT/UI:identifyMe=
Example
Î CALL/MANAGEMENT/UI:identifyMe()
Í mO/MANAGEMENT/UI:identifyMe
7.4.6. Dark Mode
ThiscommandturnsLEDsofftheonthetransmitter.
Command and Response
SET·/MANAGEMENT/UI/DARKMODE.DarkModeEnable=<status>
Î
pw·/MANAGEMENT/UI/DARKMODE.DarkModeEnable=<status>
Í
Parameters
Example
Î SET/MANAGEMENT/UI/DARKMODE.DarkModeEnable=true
Í pw/MANAGEMENT/UI/DARKMODE.DarkModeEnable=true
Appliedfirmwarepackage:v1.4.0 | LDCsoftware:v2.4.0b3
#firmwareversion
#identifyme
#darkmode
Identifier Parameter description Value
true
<status> Status of the dark mode
false
69
Explanation
Dark mode is enabled.
Dark mode is disabled.