Lock The Front Panel Buttons; Disable The Default Function Of The Front Panel Buttons; Darkmode; Dark Mode Delay - Lightware UMX-TPS-TX120 User Manual


  
7. LW3 Programmers' Reference
7.4.7. Lock the Front Panel Buttons
Command and Response #frontpanel #controllock #button
ç SET /MANAGEMENT/UI.ControlLock=<lock_status>
æ pw /MANAGEMENT/UI.ControlLock=<lock_status>
Parameters
Identifier Parameter description
Control lock status of
<lock_status>
the front panel buttons
Example
ç SET /MANAGEMENT/UI.ControlLock=1
æ pw /MANAGEMENT/UI.ControlLock=1
7.4.8. Disable the Default Function of the Front Panel Buttons
This setting makes possible to set an event with Event Manager where the Condition is pressing a button
and the original function of the chosen button will not be executed.
Command and Response
ç SET /MANAGEMENT/UI/BUTTONS/<btn_id>.DefaultFunctionEnable=<btn_status>
æ pw /MANAGEMENT/UI/BUTTONS/<btn_id>.DefaultFunctionEnable=<btn_status>
Parameters
Identifier Parameter description
<btn_id> Button identifier number
<btn_status> Status of the default function
Example
ç SET /MANAGEMENT/UI/BUTTONS/B1.DefaultFunctionEnable=false
æ pw /MANAGEMENT/UI/BUTTONS/B1.DefaultFunctionEnable=false
Value Explanation
None - All functions of the front panel button are
1
enabled.
Locked - The front panel buttons are locked and
2 they can be unlock by pressing Audio select and
Show me buttons or with LW3 protocol command.
Force locked - Locking and unlocking of the front
3 panel buttons are possible only via protocol
command.
Value Parameter value
B1 Video select
B2 Audio select
B2 Show me button
Enable The function is enabled.
Disable The function is disabled.
Applied firmware packages: (UMX-TPS): v1.5.0b4 | (WP-UMX-TPS): v1.4.0b8 | (FP-UMX-TPS): v1.4.0b8 | LDC software: v2.5.6b2
UMX-TPS-TX100 series – User's Manual
7.4.9. Dark Mode
This command turns LEDs off the on the transmitter.
Command and Response
ç SET /MANAGEMENT/UI/DARKMODE.DarkModeEnable=<status>
æ pw /MANAGEMENT/UI/DARKMODE.DarkModeEnable=<status>
Parameters
Identifier Parameter description
<status> Status of the dark mode
Example
ç SET /MANAGEMENT/UI/DARKMODE.DarkModeEnable=true
æ pw /MANAGEMENT/UI/DARKMODE.DarkModeEnable=true
7.4.10. Dark Mode Delay
The LEDs on the front panel turn off after some delay time , which can be set in seconds.
Command and Response
ç SET /MANAGEMENT/UI/DARKMODE.DarkModeDelay=<delay_time>
æ pw /MANAGEMENT/UI/DARKMODE.DarkModeDelay=<delay_time>
Parameters
<delay_time> Delay time in seconds.
Example
ç SET /MANAGEMENT/UI/DARKMODE.DarkModeDelay=10
æ pw /MANAGEMENT/UI/DARKMODE.DarkModeDelay=10

#darkmode

Value Explanation
true Dark mode is enabled.
false Dark mode is disabled.
103