Control Menu - Lightware HDMI-TPS-TX226 User Manual

   
5.SoftwareControl-LightwareDeviceController
5.9. Control Menu
5.9.1. RS-232
Thefollowingsettingsandfunctionsareavailable(bothonlocalandTPSserialports):
▪ Operationmode:Control,CommandInjection,orDisconnected(formoredetailsaboutserialinterface
modes see the SerialInterfacesection);
▪ Baudrate:4800,7200,9600,14400,19200,38400,57600,115200;
▪ Databits:8or9;
▪ Parity:None,Odd,orEven;
▪ Stopbits:1,1.5,or2;
▪ Commandinjection:enableordisable;portnumber;
▪ Controlprotocol:LW2orLW3;
▪ Messagesendingviaserialport;
▪ Reloadingfactorydefaults(seefactorydefaultsettingsintheFactoryDefaultSettings
ATTENTION!
IfthematrixisconnectedtoaTPS2outputboardofamatrixframe,theRS-232configuration
settings(baudrate,databits,etc..)willnotbechangeableonthematrixside.
RS-232 tab in Control menu
#commandinjection
#protocol #rs232 #rs-232 #serial
#message
Appliedfirmwarepackage:v1.3.2b3 | LDCsoftware:v2.5.7b2
HDMI-TPS-TX200series–User'sManual
RS-232 Message Sending
The message in the field can be sent out via the
currentRS-232port.Responsecannotbeseenin
the surface.
ATTENTION!

messageisanLW3command,ithastobeclosedbyCarriagereturnandLinefeed,e.g.:CALL/MEDIA/
VIDEO/XP:switch(I1:O1)\x0d\x0a.
RS-232 Message Recognizer

DIFFERENCE:
SW4-TPS-TX240-PlusfromFWpackagev1.2.0b13.
This tool can be used to recognize messages coming
from the RS-232 port. The message can be used as a
ConditioninEventmanageranddefineanActionforit.
Definitions
Delimiter sequence (hex): Each message is closed by this
separator(ifdefined).
Accept timeout (ms):Whenthesettimeiselapsedafterthe
last received message and delimiter was not detected,
the device saves the data into the Text, Hex, and Hash
properties. The timeout setting is useful if there is no
special or easily defined delimiter in the incoming data,
butthereisatimegapbetweenthemessages.
Text: TherecognizedmessageinASCII-format.
Hex: Therecognizedmessageinhexformat.
Hash: Binary data that is mapped from the original
message.Thelengthofthehashisshorter,andthesame
messageresultsthesamehash.
Working Method
Amessagegotrecognizedfromtheincomingdata,ifoneofthefollowingoccurs:
section).
▪ ThesetDelimiterHexisdetectedinthemessage,or
▪ ThesetTimeOuthasbeenelapsedsincereceivingthelastdatabit.
Theescapingisdoneautomaticallywhensendingamessageviathissurface.Whenthe
This feature is available only for
48