No Sync Screen (Test Pattern); Identify Stream / Identify Display - Lightware UBEX Series User Manual

 
     
8. Lightware Device Controller 8. Lightware Device Controller
8.12.2. No Sync Screen (Test Pattern)
The No sync screen feature generates an image which can be
displayed when there is no incoming signal on the port. The
following settings can be set for the Test Pattern function:
Mode
▪ Always on: the video output port always transmits the
test pattern.
Auto: the video output port transmits the test pattern if
▪
there is no incoming signal on the selected input port.
▪ Always off: the test pattern function is disabled, the
video output port transmits the video signal of the
selected input port.
Color
Three ways are available to set the no sync screen color:
Click on the predefined color;
▪
▪ Use the sliders;
▪ Type the RGB code of the color.
When the desired color is selected, press the Set color button
to store. #testpattern #nosyncscreen
Port Tile
The port tile of the HDMI outputs displays when No sync screen mode
is active.
INFO:
No sync screen will be active in the case of connected sink
device to the output port only.
Applied F-series endpoint firmware package: v1.4.1 | Applied R-series endpoint firmware package: v1.4.1 | Applied MMU firmware package: v1.2.1 | LDC software: v1.34.0b2
UBEX series – Matrix Application Mode – User's Manual UBEX series – Matrix Application Mode – User's Manual
8.12.3. Identify Stream / Identify Display
HDMI out 2 #2
No Sync Screen
No signal
0.00 Gbps
Clicking on the Identify Stream / Identify Display button makes generating 10 test colors on the display
device for 10 seconds. The feature helps to identify the stream and the screen itself physically.
#identifydisplay
The order of the generated colors
89 89
#identifystream