7.LW3Programmers'Reference
7.5.12. HDCP Setting (Output Port)
HDCP capability can be set to Auto/Always on the output ports, thus, non-encrypted content can be
transmitted to a non-HDCP compliant display. See more information in the
Command and Response
#hdcp
SET·/MEDIA/VIDEO/<out>.HdcpModeSetting=<HDCP_mode>
Î
pw·/MEDIA/VIDEO/<out>.HdcpModeSetting=<HDCP_mode>
Í
Parameters
Identifier
Parameter description
<HDCP_mode>
HDCP mode
Example
Î SET/MEDIA/VIDEO/O1.HdcpModeSetting=0
Í pw/MEDIA/VIDEO/O1.HdcpModeSetting=0
7.5.13. Test Pattern Generator Mode
The output port can send a special image towards the sink device for testing purposes. The setting is
available on the input ports with the below-listed parameters.
Command and Response
#testpattern
SET·/MEDIA/VIDEO/<out>.TpgMode=<mode>
Î
pw·/MEDIA/VIDEO/<out>.TpgMode=<mode>
Í
Parameters
Identifier
Parameter description
Test pattern generator
<mode>
mode
Example
Î SET/MEDIA/VIDEO/O1.TpgMode=2
Í pw/MEDIA/VIDEO/O1.TpgMode=2
HDCP Management
section.
Value
Parameter value
0
Auto
1
Always
Value
Parameter value
Always off: the test pattern is not displayed on
0
the output.
Always on: the test pattern is displayed on the
1
output.
Auto:thetestpatternisdisplayedifthereisno
2
signal on the input port.
Appliedfirmwarepackage:v1.4.0 | LDCsoftware:v2.4.0b3
HDMI-TPS-RX110AY series – User's Manual
7.5.14. Test Pattern Generator Clock Source
Command and Response
SET·/MEDIA/VIDEO/<out>.TpgClockSource=<clock_frequency>
Î
pw·/MEDIA/VIDEO/<out>.TpgClockSource=<clock_frequency>
Í
Parameters
Identifier
<clock_frequency>
Example
Î SET/MEDIA/VIDEO/O1.TpgClockSource=576
Í pw/MEDIA/VIDEO/O1.TpgClockSource=576
7.5.15. Test Pattern Setting
Command and Response
SET·/MEDIA/VIDEO/<out>.TpgPattern=<pattern>
Î
pw·/MEDIA/VIDEO/<out>.TpgPattern=<pattern>
Í
Parameters
Identifier
The test pattern displayed
<pattern>
Example
Î SET/MEDIA/VIDEO/O1.TpgPattern=GREEN
Í pw/MEDIA/VIDEO/O1.TpgPattern=GREEN
Parameter description
Value
480
480p
Clock frequency
576
576p
EXT
External clock (from actual TMDS source)
Parameter description
Value
RED
Red
GREEN
Green
BLUE
Blue
BLACK
Black
WHITE
White
RAMP
Ramp
on the sink device
CHESS
Chess
BAR
Bar
Cycle setting means all the patterns are
CYCLE
changed sequentially approx. in every 2
seconds
73
Parameter value
Parameter value